Table of Contents
Advertisement
Section 3 - Configuration
Wireless Setup Wizard
The setup wizard is designed to guide you through a step-by-step process to configure your new E30 for extending your wireless
network and connecting to the Internet via a wireless setup process. To set up your E30 using an Ethernet cable, please refer to "Access
Point Mode Settings" on page 21.
To access the setup utility on your PC, first connect to the E30 wirelessly using the
Wi-Fi name (SSID) and password located on the side of your E30. Then open a web
browser and enter http://XXXX.devicesetup.net/ in your browser's URL field (where
"xxxx" are the last four digits of the E30's MAC address).
If this is your first time logging in to the extender and no connection has been
established, the setup wizard will automatically appear. If the setup process was
not previously completed, then enter the default device password printed on the
device label on the back of the E30
Note: The Wi-Fi Name (SSID), Wi-Fi Password, web configuration address, and
Device Password are printed on the device label on the side of the device.
D-Link E30 User Manual
15
Advertisement
Table of Contents
