Front and Rear Panel Overview
Table 1-1
Table 1-1
Indicator
Active
System indicator
Power status indicator
MGMT0/0 indicator
MGMT0/1 indicator
Power switch and indicator Turns power on and off:
1. On a standalone device, this button is always on. In Active/Standby pairs, it is on for the active unit and off for the standby
Rear Panel
•
•
•
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
1-4
describes the front panel switches and indicators on ASA 5580.
Front Panel Switches and Indicators
Description
1
t
Indicates the Active and Standby Failover status of the chassis:
Indicates internal system health:
Indicates the power supply status:
Indicates the status of the management port:
Indicates the status of the management port:
unit. In Active/Active pairs, it is on for any unit with an active failover group. Furthermore, when the system software causes
the button to light (because it is active or standalone), pushing the button does nothing. It stays lit. When the system software
causes the button to be off, pushing the button lights it. Pushing the button again will cause it to turn off again.
Rear Panel Overview, page 1-5
Ethernet Port Activity Indicators, page 1-6
Power Supply Indicators, page 1-7
•
On—Failover active
Off—Standby Status
•
Green—System on
•
Flashing amber—System health degraded
•
Flashing red—System health critical
•
Off—System off
•
•
Green—Power supply on
•
Flashing amber—Power supply health degraded
Flashing red—Power supply health critical
•
Off—Power supply off
•
Green—Linked to network
•
Flashing green—Linked with activity on the network
•
Off—No network connection
•
•
Green—Linked to network
•
Flashing green—Linked with activity on the network
Off—No network connection
•
Amber—System has AC power and is in standby mode
•
Green—System has AC power and is turned on
•
Off—System has no AC power
•
Chapter 1
Introduction to the ASA 5580
OL-12920-01