Rear Panel - Cisco Firepower 1100 Series Hardware Installation Manual

Rear Panel

Figure 4: Firepower 1100 Series Front Panel
Rear Panel
The following figure shows the rear panel of the Firepower 1100 series. See
for a description of the LEDs.
Figure 5: Firepower 1100 Series Rear Panel
1
3
5
7
Cisco Firepower 1100 Series Hardware Installation Guide
6
Power switch
Standard rocker-type power on/off switch.
Management port
A Gigabit Ethernet interface restricted to
network management access only. Connect
with an RJ-45 cable.
USB Type A port
Allows attachment of an external device
such as mass storage.
RJ-45 (8P8C) console port
Provides management access through an
external system.
Rear Panel LEDs, on page 7
2 Power cord socket
4 SFP ports
Additional 1-Gb data ports numbered 9
through 12
USB Mini B console port
6
Provides management access through an
external system.
8 Network data ports
Eight Gigabit Ethernet RJ-45 (8P8C)
network I/O interfaces. The ports are
numbered (left to right, top to bottom) 1,
2, 3, 4, 5, 6, 7, 8. Each port includes a pair
of LEDs, one each for connection status
and link status. The ports are named and
numbered Gigabit Ethernet 1/1 through
Gigabit Ethernet 1/8.
Overview