Cisco 5580-40 - ASA Firewall Edition Hardware Installation Manual page 36

Rack-Mounting the Chassis
Repeat for each slide assembly.
c.
Make sure the slide assemblies line up with each other in the rack.
Lift the spring latch to release the slide assembly if you need to reposition it.
d.
For threaded-hole racks:
Remove the eight round- or square-hole studs on each slide assembly using a standard screwdriver,
a.
as shown in
Note
Figure 3-5
b. Line up the bracket on the slide assembly with the rack holes, install two screws (top and bottom)
on each end of the slide assembly, as shown in
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
3-6
Figure 3-5.
You may need a pair of pliers to hold the retaining nut.
Attachment in Threaded Hole Racks
2
3
Chapter 3
3
2
1
Figure 3-6.
Installing the ASA 5580
OL-12920-01