Applying Tamper Evident Labels - Cisco 5580-40 - ASA Firewall Edition Hardware Installation Manual

Chapter 3 Installing the ASA 5580
Connect the power source and power on the chassis.
Step 3

Applying Tamper Evident Labels

You must apply 16 tamper evident labels. Clean the chassis of any grease, dirt, or oil before applying the
tamper evident labels. Alcohol-based cleaning pads are recommended for this purpose.
Apply seven tamper evident labels to the front of the chassis as shown in
Step 1
Figure 21
Apply six tamper evident labels to the back of the chassis as shown in
Step 2
Figure 22
OL-12920-01
ASA 5580 Tamper Evident Label Placement
1 2 3 4 5 6 7 8
ASA 5580 Tamper Evident Label Placement
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
Installing the FIPS Enclosure
Figure 21.
Cisco ASA 5580 SERIES
Adaptive Security Appliance
Figure 22.
3-19