Web Server - Cisco 515E - PIX Restricted Bundle Getting Started Manual

Configuring the Security Appliance for a DMZ Deployment
Step 3
Step 4
Configuring NAT for Inside Clients to Communicate with the DMZ

Web Server

PIX 515E Security Appliance Getting Started Guide
2-12
The displayed configuration should be similar to the following:
Confirm that the configuration values are correct.
Click Apply in the main ASDM window.
In the previous procedure, you created a pool of IP addresses that could be used
by the security appliance to mask the private IP addresses of inside clients.
Chapter 2 Scenario: DMZ Configuration
78-17645-01