Cisco 515E - PIX Restricted Bundle Getting Started Manual page 31

Chapter 2 Scenario: DMZ Configuration
Step 6
Configuring NAT for Inside Clients to Communicate with Devices
on the Internet
78-17645-01
The displayed configuration should be similar to the following:
Click Apply to complete the security appliance configuration changes.
In the previous procedure, you configured a Network Address Translation (NAT)
rule that associates IP addresses from the IP pool with the inside clients so they
can communicate securely with the DMZ web server.
Configuring the Security Appliance for a DMZ Deployment
PIX 515E Security Appliance Getting Started Guide
2-15