Cisco M380 And M680 Content Security Management Appliance; Cisco S380 And S680 Web Security Appliance; External Features - Cisco 380 Series Hardware Installation Manual

Cisco M380 and M680 Content Security Management Appliance

Cisco M380 and M680 Content Security Management Appliance (Cisco M380 and M680) is a central
platform for managing all policy, integrated reporting on traffic data, and email auditing information for
the Cisco 380 and Cisco 680 Series appliances. For information about Cisco M380 and M680, see:
http://www.cisco.com/en/US/products/ps10155/prod_installation_guides_list.html

Cisco S380 and S680 Web Security Appliance

Cisco S380 and S680 Web Security Appliance (Cisco S380 and S680) is a secure web gateway that
combines advanced malware protection, appliance visibility and control (AVC), acceptable user policy
controls, insightful reporting, and secure mobility on a single platform. It is a single platform for
administrators to set security policy, control applications on a granular level, and get visibility into web
traffic trends at organizations and for remote and mobile users. For information about Cisco S380 and
S680, see:
http://www.cisco.com/en/US/products/ps10164/prod_installation_guides_list.html

External Features

The figures in this chapter show an overview of external appliance features. The Cisco 380 and Cisco
680 series appliance uses small form-factor (SFF) drives in a 24-drive backplane and expander. Holds
up to a maximum of twenty-two 2.5-inch hard drives.
Figure 1-1
Figure 1-1
Cisco 380 and Cisco 680 Series Hardware Installation Guide
1-2
shows the front panel features of the appliance.
Cisco 380 and Cisco 680 Series Appliance Front Panel Features
Chapter
OL-29172-01