Configuring Nat For Inside Clients To Communicate With The Dmz Web Server - Cisco ASA 5550 Series Getting Started Manual

Configuring the Security Appliance for a DMZ Deployment
Step 3
Step 4
Configuring NAT for Inside Clients to Communicate with the DMZ
Web Server
Cisco ASA 5550 Getting Started Guide
6-12
The displayed configuration should be similar to the following:
Confirm that the configuration values are correct.
Click Apply in the main ASDM window.
In the previous procedure, you created a pool of IP addresses that could be used
by the adaptive security appliance to mask the private IP addresses of inside
clients.
Chapter 6 Scenario: DMZ Configuration
78-17644-01