Cisco 515E - PIX Restricted Bundle Getting Started Manual page 45

Chapter 3 Scenario: IPsec Remote-Access VPN Configuration
Information to Have Available
Starting ASDM
78-17645-01
Specifying the VPN Tunnel Group Name and Authentication Method,
•
page 3-7
Specifying a User Authentication Method, page 3-8
•
(Optional) Configuring User Accounts, page 3-10
•
Configuring Address Pools, page 3-11
•
Configuring Client Attributes, page 3-12
•
Configuring the IKE Policy, page 3-13
•
Configuring IPsec Encryption and Authentication Parameters, page 3-15
•
Specifying Address Translation Exception and Split Tunneling, page 3-16
•
Verifying the Remote-Access VPN Configuration, page 3-17
•
Before you begin configuring the security appliance to accept remote access IPsec
VPN connections, make sure that you have the following information available:
• Range of IP addresses to be used in an IP pool. These addresses are assigned
to remote VPN clients as they are successfully connected.
List of users to be used in creating a local authentication database, unless you
•
are using a AAA server for authentication.
Networking information to be used by remote clients when connecting to the
•
VPN, including:
IP addresses for the primary and secondary DNS servers
-
IP addresses for the primary and secondary WINS servers
-
Default domain name
-
List of IP addresses for local hosts, groups, and networks that should be
-
made accessible to authenticated remote clients
To run ASDM in a web browser, enter the factory default IP address in the address
field: https://192.168.1.1/admin/.
Implementing the IPsec Remote-Access VPN Scenario
PIX 515E Security Appliance Getting Started Guide
3-3