Cabling A Fiber Optic Module; Cleaning The Fiber Optic Connectors - Dell PowerConnect B-FCX624 Hardware Installation Manual

FIGURE 36
1
FIGURE 37
4. Grasp the bail latch and pull the copper or fiber optic module out of the port.
FIGURE 38
5. Store the
6. Install a new

Cabling a fiber optic module

For instructions on cabling a fiber optic module refer to
page 42.

Cleaning the fiber optic connectors

For instructions on cleaning a fiber optic module refer to
page 43.
PowerConnect B-FCX Switch Hardware Installation Guide
53-1002267-01
Unlocking the bail latch
1
Bail Latch
Removing the bail latch
NOTE
The bail latch may be attached to either the top or the bottom of the mini-GBIC.
Remove fiber optic module
fiber optic module in a safe, static-free place or in an anti-static bag.
copper or
fiber optic module in the port.
copper or
Replacing a copper or fiber optic module
"Cabling a fiber optic transceiver"
"Cleaning the fiber optic connectors"
4
on
on
55