Dell 2335dn - Multifunction Monochrome Laser Printer B/W User Manual page 21

To power on the printer:
1. Plug one end of the power cord into the power receptacle at the back of the printer and the other end
into a properly grounded outlet.
2. Press the power switch to turn on the printer. Warming Up Please Wait appears on the display
indicating that the printer is now on.
NOTE: If you power on the printer for the first time, you have to set the language, date, time, country
and fax setup sequence. These settings may be needed also after the firmware upgrade or after the
printer reset.
Setting fax setup sequence
1. Set the language. See
2. Select the country. See
3. Set the date and time. See
4. When Fax Setup appears, press Scroll (
If you selected No, your printer restores the fax settings
as default.
If you selected Yes.
a. Your printer prints out Fax Setup Help Report.
b. Enter machine ID. See
c. Select the receive mode and ring to answer. See
d. Test fax line. See
5. Your printer returns to the Standby mode.
"Changing the Display Language".
"Selecting Country".
"Setting the Time and
or
"Setting the Printer
"Testing Fax line connection".
Date".
) to select Yes or No.
ID".
"Setting up the Fax
Page 21 of 52
System".