Removing A Saved Environment; Changing Firewall Settings; Section 3.3, "Changing Firewall Settings - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ENDPOINT SECURITY CLIENT Manual

Hide thumbs Also See for ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ENDPOINT SECURITY CLIENT:

Table of Contents

2 Specify any necessary security information (WEP or other security key), then click Connect.

3 Complete the steps outlined in

save this environment.

3.2.3 Removing a Saved Environment

To remove a saved network environment from a location:

1 Right-click the Endpoint Security Client icon in the taskbar to display the menu.

2 Change to the appropriate location.

3 Right-click the Endpoint Security Client icon, then select the current location to display the

submenu.

4 Click Clear Network Environment to clear the environment.

NOTE: This clears all saved network environments for this location.

Each location can be assigned more than one firewall setting. Changing the firewall setting can open

or close networking ports and allow or disallow certain types of networking in a given location.

To change the firewall settings:

1 Right-click the Endpoint Security Client icon in the taskbar to display the menu.

ZENworks Endpoint Security Client 3.5 User Guide

Section 3.2.1, "Saving a Network Environment," on page 16

Table of Contents

Table of Contents

Do you have a question about the ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ENDPOINT SECURITY CLIENT and is the answer not in the manual?