Specifying User And Device Coverage; Adding Covered Devices To Oem And Machine Entitlements - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual

3 Select the discover products that you want to add to an entitlement.
4 Click Action > Add to Licensed Product to launch the Add Discovered Products to Licensed
Product Wizard. Complete the wizard by using the information in the following table:
Wizard Page
Licensed Product
License Entitlement
Summary
5 If you have not already done so, click Finish to add the discovered products to the entitlement.
In the Discovered Products list, the discovered product displays the licensed product with
which it is now associated.

7.6 Specifying User and Device Coverage

When you have an entitlement that uses an OEM, Machine, Per-Named User, or Per-User license
model, you must specify which devices or users are covered by the entitlement. The following
sections provide instructions:
Section 7.6.1, "Adding Covered Devices to OEM and Machine Entitlements," on page 63
Section 7.6.2, "Adding Covered Users to Per-Named User Entitlements," on page 64
Section 7.6.3, "Excluding Users from Per-User Entitlements," on page 66
7.6.1 Adding Covered Devices to OEM and Machine
Entitlements
When you create an entitlement with an OEM or Machine license model, you must specify the
devices that you want covered by the entitlement. Only the covered devices are eligible to consume
the entitlement's licenses.
1 If you are on the licensed product's License Entitlements page, skip to
the page:
1a In ZENworks Control Center, click the Asset Management tab.
1b On the License Management page, click Licensed Products.
1c Click the product whose entitlement coverage you want to modify.
Details
Click to browse for and select the licensed product that contains the
entitlement to which you want to add the discovered products.
Select the entitlement to which you want to add the discovered
products.
Review the data.
Step 2. Otherwise, open
Working with Entitlements 63