Adding Custom Fields To Licensed Products; Section 6.7, "Adding Custom Fields To Licensed Products - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual

2 In the Licensed Products panel, click the licensed product whose general information you want
to edit.
3 Modify the fields as needed:
Manufacturer: Select the product's manufacturer from the list or enter a new manufacturer.
Licensed Product: Select a name for the licensed product from the list or enter a new name.
Version: If the licensed product represents a specific version, specify the version. If not, leave
the field empty.
Notes: Add any information you want to retain with the product.
Cost Center: This is a custom field added as an example. It is not included in the predefined
general information. You can add as many custom fields as you'd like. For information, see
Section 6.7, "Adding Custom Fields to Licensed Products," on page

6.7 Adding Custom Fields to Licensed Products

A licensed product includes predefined fields for recording the product's manufacturer, name, and
version. These fields are displayed on the licensed product's General page.
You can create custom fields to record additional information for licensed products. When you
create a custom field, it is added to each licensed product's General page. It is also included in the
Create New Licensed Product Wizard so that you can populate the field during creation of licensed
products.
To create custom fields:
1 In ZENworks Control Center, click Configuration, then click the Asset Management tab.
49.
Working with Licensed Products 49