Table of Contents
Advertisement
the documentation for your mouse for a description of the model. Click Change to select
the vendor and model from two lists then click OK to confirm your selection. In the
options part of the dialog, set various options for operating your mouse.
Activate 3-Button Emulation
If your mouse has only two buttons, a third button is emulated when you click both
buttons simultaneously.
Activate Mouse Wheel
Check this box to use a scroll wheel.
Invert X-Axis and Invert Y-Axis
If one of these options is selected, the mouse pointer moves in the opposite direction.
For touch pads, this feature is sometimes useful.
Emulate Wheel with Mouse Button
If your mouse does not have a scroll wheel but you want to use similar functional-
ity, you can assign an additional button for this. Select the button to use. While
pressing this button, any movement of the mouse is translated into scroll wheel
commands. This feature is especially useful with trackballs.
When you are satisfied with your settings, click OK to confirm your changes.
NOTE
Any changes you make here take effect only after you restart the X server.
8.15.3 Keyboard Properties
Use this dialog to adjust the settings for operating your keyboard in the graphical envi-
ronment. In the upper part of the dialog, select the type, language layout, and variant.
Use the test field at the bottom of the dialog to check if special characters are displayed
correctly. Select additional layouts and variants to use from the list in the middle. De-
pending on the type of your desktop, these may be switched in the running system
without the need for reconfiguration. After you click OK, the changes are applied im-
mediately.
System Configuration with YaST
187
Advertisement
Table of Contents
Troubleshooting
