2 In the System Configuration Profile Management dialog, click Configure in the
Resource Groups part of the dialog.
All resource groups available on your system are listed as shown in
"Configuring Resource Groups"
3 To add or edit a resource group:
3a Set or edit Resource Group and Description.
3b Enter the appropriate resources (resources, services, or both) and delete those
that are not needed. To reset the status of the selected resources—discard
any changes made to them and return to the initial configuration val-
ues—choose Reset Group.
3c Click OK to leave the resource configuration.
4 Click OK to save your changes to the active profile.
Figure 27.3 Configuring Resource Groups
(page 531).
System Configuration Profile Management
Figure 27.3,
531