Configuration File - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

4.3.4 PXELINUX Configuration Options
The options listed here are a subset of all the options available for the PXELINUX

configuration file.

64 Deployment Guide
# failsafe
label failsafe
kernel linux
append initrd=initrd ramdisk_size=65536 ide=nodma apm=off acpi=off \
insmod=e100 install=nfs://ip_instserver/path_instsource/product/CD1
# apic
label apic
kernel linux
append initrd=initrd ramdisk_size=65536 apic insmod=e100 \
install=nfs://ip_instserver/path_instsource/product/CD1
# manual
label manual
kernel linux
append initrd=initrd ramdisk_size=65536 manual=1
# rescue
label rescue
kernel linux
append initrd=initrd ramdisk_size=65536 rescue=1
# memory test
label memtest
kernel memtest
# hard disk
label harddisk
localboot 0
implicit 0
display message
prompt 1
timeout 100
Replace ip_instserver and path_instsource with the values used in
your setup.
The following section serves as a short reference to the PXELINUX options used
in this setup. Find more information about the options available in the documen-
tation of the syslinux package located under /usr/share/doc/
packages/syslinux/.