Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 255

<schema_key>/schemas/apps/panel/objects/launcher_location
</schema_key>
<value>
<string>hadjaha-00adce02f7.desktop</string>
</value>
</entry>
In the above example, you might want to change the reference to
hadjaha-00adce02f7.desktop to another desktop entry file that is
available globally.
When you generate a panel configuration with the --dump option, the positions
of the panel objects are absolute positions. You might want to change these posi-
tions to relative positions. The object at the extreme left of a panel has a position
value of 0. The next object has a position value of 1, and so on. If you want object
positions to be relative to the right side of the panel, set the value of the
right_stick key to True.
4 Use the --load option with the gconftool-2 command line tool to set the
values of the default configuration source to the values in the my-panel-setup
.entries file.
For example, the following command sets the values of the keys in the default
configuration source to the values of the corresponding keys in my-panel-set-
up.entries:
gconftool-2 --direct --config-source
xml:readwrite:/etc/opt/gnome/gconf/gconf.xml.defaults --load
my-panel-setup.entries
10.1.6 Setting Look-and-Feel Preferences
The following sections describe how to assign mandatory or default values to look-and-
feel preferences:
• Section "Setting Panel and Panel Object Preferences"
• Section "Setting Background Preferences"
• Section "Setting Splash Image Preferences"
(page 235)
(page 240)
(page 241)
GNOME Configuration for Administrators 239