Release Notes; Hardware Configuration - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

Table of Contents

Advertisement

NOTE: Content of the Authentication Menu
If you use the custom package selection and one or more authentication
methods are missing from the menu, the required packages probably are not
installed.
Along with the selected user administration method, you can use Kerberos authentication.
This is essential for integrating your SUSE Linux Enterprise to an Active Directory
domain, which is described in
Kerberos authentication, select Set Up Kerberos Authentication.

3.11.7 Release Notes

After completing the user authentication setup, YaST displays the release notes. Reading
them is recommended, because they contain important up-to-date information which
was not available when the manuals were printed. If you tested the Internet connection,
read the most recent version of the release notes, as fetched from SUSE Linux Enter-
prise's servers. Use Miscellaneous > Release Notes to view the release notes after instal-
lation.

3.11.8 Hardware Configuration

At the end of the installation, YaST opens a dialog for the configuration of the graphics
card and other hardware components connected to the system. Click the individual
components to start the hardware configuration. For the most part, YaST detects and
configures the devices automatically.
You can skip any peripheral devices and configure them later, as described in
"Hardware"
(page 136) . To skip the configuration, select Skip Configuration and click
Next.
However, you should configure the graphics card right away. Although the display
settings as configured by YaST should be generally acceptable, most users have very
strong preferences as far as resolution, color depth, and other graphics features are
concerned. To change these settings, select the respective item and set the values as
desired. To test your new configuration, click Test the Configuration.
Chapter 12, Active Directory Support
(page 303). To use
Section 8.4,
Installation with YaST
37

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Linux enterprise desktop 10 sp2

Table of Contents