Advertisement
Quick Links
Fresnel
Model No. F96VW
USER MANUAL
For safety, please read this user manual carefully before initial use.
Event Lighting reserves the right to revise the manual at any time. Information and specifications within this
manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any
errors or omissions. Please consult Event Lighting for any clarification or information regarding this item.
www.eventec.com.au
Ver 3.3 (14.05.2025)
Advertisement
Related Manuals for Event Lighting F96VW
Summary of Contents for Event Lighting F96VW
- Page 1 For safety, please read this user manual carefully before initial use. Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any errors or omissions.
- Page 2 www.eventec.com.au CONTENTS Safety Instructions ................... 2 Power input & power Linking..................2 Product Installation ..................2 Fuse replacement ....................... 2 Diagrams ......................3 Lux chart .........................3 Dimensions........................3 Control Board Operation.................. 4 DMX address setting....................4 DMX modes setting..................... 4 Manual colour setting....................
- Page 3 www.eventec.com.au Safety Instructions WARNING • Do not open this device, there is no user-serviceable parts inside. Risk of electric shock. • Do not look at the light source when the device is on. • CAUTION: This unit's housing may be hot during and after operation. •...
- Page 4 www.eventec.com.au Lux Chart Dimensions...
- Page 5 www.eventec.com.au CONTROL BOARD OPERATION Display Options / Values Function DMX Add <001> - <508> To set DMX address DMX Cha <01>, <02>, <05>,<User> To set DMX channel modes DMXLoss <Hold><Blacko><Manual> Select mode when DMX loss UserDMX CH:<01> End Edit a user DMX mode Preset <StraW>...
- Page 6 www.eventec.com.au So for example, once 'User DMX' is selected, you can click through the channels so by default it may be the max amount of channels allocated, then you can re-arrange as you please and once you are finish, put an option to have the last channel 'End' so that it stops.
- Page 7 www.eventec.com.au Fade Mode DMX Chart 1 channels Mode Channel Value Function 000 - 255 Dimmer & Colour temperature 1U channels Mode Channel Value Function 000 - 255 Dimmer ( dim the preset color selected in Menu 2 channels Mode Channel Value Function 000 - 255...
- Page 8 www.eventec.com.au 5 channels Mode Channel Value Function 000 - 255 Master dimmer coarse: 0% ~ 100% 000 - 255 Master dimmer fine: 0% ~ 100% 000 - 255 Warm white to cool white 000 - 015 No function(Shutter on) 016 - 119 Strobe slow to fast (1-25Hz) 120 - 127 Shutter on...
- Page 9 www.eventec.com.au TECHNICAL SPECIFICATIONS Power Power Supply: 100~240V AC, 50/60 Hz Power Consumption: 75W Power Connection: Seetronic in / out Photometrics Light Source: 1 x 48W*2 cool white 5700K and warm white 2700K COB LED CRI: 95+ Beam Angle: 20° - 50° Field Angle: 50°...
Need help?
Do you have a question about the F96VW and is the answer not in the manual?
Questions and answers