Event Lighting NITROBALL User Manual

Event Lighting NITROBALL User Manual

5x 12w led rgbw spherical light

Advertisement

Quick Links

NITROBALL
5x 12W LED RGBW Spherical Light
USER MANUAL
For your safety, please read this user manual carefully before use.
Event Lighting reserves the right to revise the manual at any time. Information and specifications
within this manual are subject to change without notice. Event Lighting assumes no liability or
responsibility for any errors or omissions. Please consult Event Lighting for any clarification or
information regarding this item.
Version 1.0 (revised 5 November 2020)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NITROBALL and is the answer not in the manual?

Questions and answers

Summary of Contents for Event Lighting NITROBALL

  • Page 1 For your safety, please read this user manual carefully before use. Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any errors or omissions.
  • Page 2 This device has an auto switching power supply work with input voltage range of 100-240V AC, 50/60Hz. Product Installation NITROBALL can be mounted in many orientations, provided each individual device is secured by the use of the correct mounting bracket. Use a safety chain when mounting NITROBALL overhead.
  • Page 3 The fixture will automatically save the selected setting after a few seconds. • When NITROBALL is connected via DMX or SLAVE signal, it automatically activates DMX or SLAVE mode. If you disconnect it, NITROBALL will return to the previous setting.
  • Page 4 www.event-lighting.com.au Menu Press the MENU button to select an operation mode or return to the previous menu. Use UP and DOWN to navigate the menu. Press ENTER to change or activate menu options. Select DMX Address Master Mode Slave Mode First digit: Motor Speed.
  • Page 5 • DMX Channels: 8 • Interface: 3-pin DMX in/out. • Display: LED Display with 4-button control. Housing • Finishing: Matte Black. • Net Weight: 3.6kg • Dimensions: 312x312x383 mm. Warranty Please refer to your local dealer or contact Event Lighting.

Table of Contents