Advertisement
Quick Links
Advertisement
Related Manuals for gofanco HD20Ext-Aud
Summary of Contents for gofanco HD20Ext-Aud
- Page 1 18G HDMI 2.0 CAT Extender with IR - 70m User's Guide P/N: HD20Ext-Aud G4-0108A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
- Page 3 • Shut off power and make sure environment is safe before installation • Do not plug the HDMI cables and IR cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports •...
- Page 4 • Near zero latency • Lightning/Surge/ESD protection Package Contents • 18G HDMI 2.0 CAT Extender with IR - 70m (1 Transmitter & 1 Receiver) • 1x IR Blaster cable and 1x IR Receiver cable • 2x Power adapter (5VDC/2A) • Surface mount accessories •...
- Page 5 Product Layout Transmitter TX Front and Rear Panel Reset Button: Press to reset the TX RJ45 Out: Connects to the Receiver's RJ45 In using a CAT cable Power/Signal LED: Blinks when powered on with no HDMI signal detected, and solid on when HDMI signal is detected Power Jack: Connects to the included power adapter...
- Page 6 Receiver RX Front and Rear Panel Reset Button: Press to reset the RX Audio Switch: Extracts HDMI/ARC audio to Optical Out: • S/PDIF: Extracts audio from the HDMI source (from TX) to S/PDIF Toslink output • ARC: Extracts audio from the display (RX's HDMI output) to S/PDIF Toslink output RJ45 Out: Connects to the Receiver's RJ45 In...
- Page 7 IR In: Connects to the included IR Receiver cable to control the remote display device from the HDMI source location IR Out: Connects to the included IR Blaster cable to control the HDMI source device from the remote display location CAT Cable Wiring We suggest both RJ45 connectors be wired identically using T568B wiring standard for the...
- Page 8 Hardware Installation Power off all devices including your HDMI source and HDMI display(s). Connect your HDMI source device to the Transmitter's HDMI In connector with an HDMI cable (HDMI cable not included). Optional: Connect your HDMI display to the Transmitter's HDMI Out connector with an HDMI cable (HDMI cable not included) for local monitoring of the HDMI signal.
- Page 9 Power on all connected devices. 10. The HDMI extender is ready for use. Application Diagram IR Application HDMI Source Device Control from RX Location Connect the IR Blaster cable to the TX's IR Out port. Face the eye towards your HDMI source device's IR window.
- Page 10 Specifications Item Specifications HDMI Signal HDMI 2.0 and HDCP 2.2 compatible 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 3840X2160@24/30/50/60Hz, Resolution 4096x2160@24/25Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600 Low resistance, oxygen free, 100% Network Cable copper (CAT6/CAT6A/CAT7) Audio Formats Up to Dolby Digital 5.1Ch Transmission Distance Up to 230 ft (70m)
- Page 11 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products.
- Page 12 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the HD20Ext-Aud and is the answer not in the manual?
Questions and answers