Table 1-9. SNMP Notification Recipients CLI Commands
CLI Command
snmp-server v3-host {ip- address |
hostname } username [traps | informs]
{noauth | auth | priv} [udp-port
port ] [filter filtername ] [timeout
seconds ] [retries retries ]
show snmp
The following is an example of the CLI commands:
console (config)# snmp-server host 172.16.1.1 private
console# show snmp
Community-String
----------------
public
private
private
Description
Creates or updates a notification recipient
receiving notifications in SNMP version 3.
Shows the current SNMP configuration.
Community-Access View name
---------------- ---------
read only
read write
su
IP address
----------
user-view
All
default
172.16.1.1
DefaultSuper 172.17.1.1
37