Table 1-15. STP LAG Settings CLI Commands
CLI Command
spanning-tree guard root
show spanning-tree [ethernet interface
| port-channel port-channel-number]
show spanning-tree [detail] [active |
blockedports]
The following is an example of the CLI commands:
console(config)# interface port-channel 1
console(config-if)# spanning-tree port-priority 16
Configuring Multiple Spanning Tree
MSTP operation maps VLANs into STP instances. Multiple Spanning Tree provides differing load balancing
scenario. For example, while port A is blocked in one STP instance, the same port is placed in the Forwarding
State in another STP instance.
In addition, packets assigned to various VLANs are transmitted along different paths within Multiple Spanning
Trees Regions (MST Regions). Regions are one or more Multiple Spanning Tree bridges by which frames can be
transmitted. To open the MSTP Settings page, click Switch → Spanning Tree → MSTP Settings in the tree
view.
Description
Enables root guard on all the spanning
tree instances on that interface.
Displays spanning tree configuration.
Displays detailed spanning tree
information on active or blocked ports
57