Figure 1-40. VLAN Port Table
11
Select the Port VLAN Mode.
12
Click
VLAN Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the VLAN Port
Settings page.
Table 1-17. QinQ CLI Commands
CLI Command
Console>enable
Console#config
Console (config)#
Console (config)# vlan database
Console (config-vlan)# vlan 100
Console (config-vlan)# exit
Console (config)# interface ethernet e5
Console (config-if)# switchport mode customer
Console (config-if)# switchport customer vlan 100
Console (config-if)# exit
Console (config)# interface ethernet e10
Console (config-if)# switchport mode trunk
Console (config-if)# switchport trunk allowed vlan add 100
Console (config-if)# exit
. The customer VLAN is defined, and the device is updated.
65