Dell 5324 - PowerConnect Switch User Manual Addendum page 42

Destination File Name (1-160 Characters) — Indicates the Configuration file path to which the file is
uploaded.
Transfer File Name — The software file to which the configuration is uploaded. The possible field values are:
Running Configuration — Uploads the Running Configuration file.
Startup Configuration — Uploads the Startup Configuration file.
Backup Configuration — Uploads the Backup Configuration file.
Uploading Files
1
Open the File Upload to Server page.
2
Define the file type to upload.
3
Define the fields.
4
Click Apply Changes.
The software is uploaded to the device.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the File Upload to
Server page.
Table 1-11. File Upload CLI Commands
CLI Command
copy source-url destination-
url [snmp]
The following is an example of the CLI commands:
console# copy image tftp://10.6.6.64/uploaded.ros
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Copy: 4234656 bytes copied in 00:00:33 [hh:mm:ss]
01-Jan-2000 07:30:42 %COPY-W-TRAP: The copy operation was
completed successfully
42
Description
Copies any file from a source to a destination.