Miscellaneous Control; Load Standard/Optimized Defaults - JETWAY V623DMR1A User Manual

only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Current Fan 1 Speed
Current Fan 2 Speed
CPU Vcore
3.3V
+12V
Internal VCC
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
VIA C3 Clock Ratio
Intel CPU Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
** Current Host/PCI Clock is 133/133 MHz **
Host/PCI Clock at Next Boot is
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is
+2.5V Select
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
Host/PCI Clock at Next Boot is
This item allows you to select the CPU/PCI Clock, refer to
By press PageDown/PageUp key you can change the CPU Host/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/33∼99/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/33∼132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/33∼200/50MHz
CPU Clock Ratio
This item allows you to select the CPU ratio.

3-12 Load Standard/Optimized Defaults

Load Standard Defaults
PC Health Status
4964 RPM
0 RPM
1.450V
3.208V
12.256V
3.200V
F6:Optimized Defaults F7:Standard Defaults
Miscellaneous Control
Default
Default
Enabled
Disabled
133/33MHz
133MHz
2.55V
F6:Optimized Defaults F7:Standard Defaults
34
Item Help
Menu Level >
Item Help
Menu Level >
Page 10.
F1:General Help
F1:General Help