Table of Contents
Advertisement
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1. Check motherboard jumper setting
2. Install CPU and Fan
3. Install System Memory (DIMM)
4. Install Expansion cards
5. Connect IDE and Floppy cables, Front Panel /Back Panel cable
6. Connect ATX Power cable
7. Power-On and Load Standard Default
8. Reboot
9. Install Operating System
10. Install Driver and Utility
2-2 Checking Motherboard's Jumper Setting
(1) Keyboard Power On function Enabled/Disabled (3-pin): JP1
When setting Enabled you can using keyboard by key in password to power on system.
(2) USB Power On function Enabled/Disabled (3-pin): JP6
When setting Enabled you can using USB Device to power on system.
Chapter 2
1
3
JP1
1-2 closed
K/B Power ON Disable
(Default)
Keyboard Power On Setting
JP6
1
3
JP6
1
3
6
1
JP1
2-3 closed K/B Power ON Enabled
JP6
1-2 closed
USB Power On Disabled (Default)
JP6 2-3 closed
USB Power On Enabled
3
Advertisement
Table of Contents
