Table of Contents
Advertisement
Handwheel for blade tilt setting
The saw blade can be tilted steplessly between 0°
and 45°.
The centre of motion is at saw table level, so the
depth of cut remains the same, regardless of the
bevel angle.
Ratchet lock lever
The set bevel angle can be locked with a ratchet
lock lever, so it does not change during sawing.
3
There are several ratchet lock levers on the
saw. If the swivelling range is not sufficient,
the lever position can be shifted:
pull lever up, turn and let engage again.
PKF 255 V8
Handwheel for setting the depth of cut
The depth of cut can be adjusted by turning the
handwheel.
3
To compensate for possible play in the blade
height setting mechanism, always raise the
blade to the desired position.
Travelling sizing table
The travelling sizing table provides for exact work-
piece guiding during the cutting operation.
Travelling sizing tables are available in 950 mm and
1800 mm length.
The travelling sizing table is mounted on the saw to
the left of the saw blade (see „Assembly and con-
nection").
· To move the travelling sizing table pull travel
lock lever and turn by 90˚.
45
2.5
Hide quick links:
Advertisement
Table of Contents
