Important Notes - Canton ACTIVE SUBWOOFER Manual

Important:
Please read these operating instructions carefully and keep them for reference.
Canton cannot be held liable for any damage resulting from non-compliance
with the following instructions.
Choose a level, dry and clean place for your speakers, away from windows
with direct sunlight, heat sources, vibrations, high humidity and extreme cold.
Never open the housing. Contact your authorized dealer or a qualified repair
specialist in the event of problems or defects.
To prevent damage, your subwoofer may only be operated with the voltage
specified on the nameplate.
To avoid the risk of fire and the possibility of an electric shock, the subwoofer
may not be exposed to rain or high air humidity (> 80%).
Do not use force on the operating elements, connections or cables. Disconnect
the mains cable and connection cables to other equipment before shifting to
another place. Always pull the plugs and not the cables. Never touch the mains
cable with wet hands.
To protect the high-level stages of the subwoofer from overheating, a minimum
space of 10 cm from walls and furniture must be observed when setting up the
equipment. Avoid heat accumulation and do not cover your subwoofer with
curtains, tablecloths etc.
To avoid image interference, ensure that there is sufficient space (min. 1 m)
between the subwoofer and the TV (tube TVs only).
Do not place your subwoofer close to heat sources or open flames (e.g.
candles). Please disconnect the subwoofer from the mains when not in use for
longer periods, during thunder storms or in the event of flooding.
Do not place any objects on the subwoofer housing or bass reflex opening.
Oscillations and vibrations can damage them.
Do not insert any objects or body parts into the subwoofer opening. Live
components inside the housing could get touched and damaged. This can lead
to short circuiting, electric shocks and fire.
Turn down the volume immediately if sound distortions, such as unnatural
knocking, beating or high-frequency clicking can be heard.
Do not use any chemical solutions to clean the equipment. Use a clean, dry
cloth.
If exposed to severe temperature fluctuations, condensation (water drops) can
form inside the subwoofer. In this case, wait for at least 2 hours until the
moisture has evaporated before putting the equipment into operation.
The mains plug must always be accessible so that it can be removed in an
emergency!
The correct setup and connection of the subwoofer are the responsibility of the
user. Canton will not accept any responsibility for damage or injuries caused
by incorrect setup or faulty connection.