AMX COLOR ACTIVE VIDEO TOUCH PANEL (G3 FIRMWARE) Instruction Manual page 27

FIG. 23 Setup page
4. Press
page when enabled, as shown in FIG. 24.
FIG. 24 Protected Setup page with the active EDITOR button
5. Press
6. Press
indicating Edit mode is active.
7. Press
used to design and modify button and page settings.
FIG. 25 Main page with Edit bar
6" Color Video Touch Panels
to enable Edit mode. The
EDITOR
to close the Protected Setup page and return to the Setup page (now the Edit mode).
EXIT
again to return to the Main page. The
EXIT
to open the Edit bar. The
EDIT
button is highlighted in the Protected Setup
EDITOR
button appears at the top of the page
EDIT
and options, in the Edit bar, (FIG. 25) are
BUTTON PAGE
Edit bar
Designing Touch Panel Pages
23