AMX COLOR ACTIVE VIDEO TOUCH PANEL (G3 FIRMWARE) Instruction Manual page 13

.12
2.900
FIG. 7 Wall Mount panel cutout dimensions for flat surface mounting
U
P
THESE 4 HOLES ARE REQUIRED
ONLY WHEN MOUNTING UNIT TO A
SOLID SURFACE (PODIUM, DESK, ETC.).
SECURE UNIT WITH #4 SCREWS.
SUGGEST INSTALLATION OF #4-40
THREADED INSERTS AT THESE 4
LOCATIONS.
FIG. 8 Sample router cutout dimension template for the CV6
12. Reconnect the AXlink wiring to the Central Controller. The touch panel beeps when power is
applied.
6" Color Video Touch Panels
6.79
(BEZEL)
6.21
5.97
ZERO RADIUS REQUIRED
IN THESE 4 CORNERS.
THESE 4 HOLES ARE ONLY REQUIRED
WHEN MOUNTING UNIT TO A SOLID
SURFACE (PODIUM, DESK, ETC.).
SECURE UNIT WITH #4 SCREWS.
SUGGEST INSTALLATION OF #4-40
THREADED INSERTS AT THESE 4
LOCATIONS.
CUTOUT
FRONT BEZEL
FRONT BEZEL
CUT-OUT TEMPLATE
AXD-CV6
(NOT FOR USE WITH BB-CV6 CONDUIT BOX)
THESE 2 NOTCHES ARE REQUIRED
ONLY IF UNIT IS INSTALLED USING
FRONT BEZEL
DRYWALL EXPANSIONS CLIPS
(2 PROVIDED)
.28 REF
4.43
5.37
(BEZEL)
#4-40 machine screw inserts (#4 screws)
used for mounting to a flat surface (provided
by installer)
U
P
If something happens
to the template, contact
DRYWALL CLIPS (2)
2" LONG SCREWS (2)
your sales representative
NOTE ORIENTATION -
REAR CONNECTORS
for another copy.
TOWARDS TOP
Installation
9