Introduction
Refer to the PosiTrack Unit Lens Compatibility table on page 1. Four solid state relays are also
provided to control the zoom, focus, and iris speed/position mode selection and iris local/auto
selection on the Fujinon MD series and Canon KTSA series lenses.
Sample Product Application
FIG. 2 shows a sample camera control application using the AXB-PT15.
Local 12 VDC
power supply
FIG. 2 Sample AXB-PT15 camera product application
Use a separate power supply to power each PosiTrack unit. Power to the PosiTrack
unit is supplied from the external power supply to the unused power pin on the
PosiTrack unit's AXlink connector.
The AXB-PT5 unit requires the use of a 12 VDC-compliant power supply which meets
the power requirements outlined within the Specifications table on page 2.
4
Application #1 - AXlink
AMX AXB-PT15
12 VDC
Power Supply
PWR cable
AMX ABS (AXlink Bus Strip)
Application #2 - RS-232
AMX AXB-PT15
PWR cable
AMX AXB-EM232 (rear view)
AXlink
RS-232
AXlink
12 VDC
Power Supply
AXB-PT15 PosiTrack Camera Controller
AMX AXP-PLV
12VDC
RS-232 / 422
AXlink
PWR
PWR cable
PC or other
RS-232
controller