Whitmor 6780-3139-WHT Manual

6780-3139-WHT 20 Pair Shoe Stand
A B
1 ea 1 ea
Right side base Left side base
STEP 1.
Place right side base (A) on a flat hard surface. Press tubes (C) into each
hole in the assembled right base. Press tubes firmly until seated into the holes.
STEP 2.
Place left side base (B) on top of tubes aligning the holes in the side base with
the end of each tube. Press the side base down until tubes are firmly seated into the
holes.
Part
A
B
C
MADE IN CHINA
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor's Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: customer_service@whitmor.com
Rev. 0 | 5.11.10
NOTE: Parts A & B are marked
"right" and "left".
C
8 ea
Tube
C C C
C C C
A
B
Reference
F6990
F6991
F6992
Printed in China
2010 Whitmor
©
C
C
STEP 3.
upright. Assembly is now complete.
This product's intended use
is for shoe storage.
Tools Needed: No tools required.
Set assembled shoe rack
Assembly
Time:
Less than
15 minutes.