Download Print this page

Whitmor The Container Store Clip & Cube 6739-11676-WHT Assembly Instructions Manual

Advertisement

Quick Links

Clip & Cube
®
PARTS:
A
2 ea
Top/Bottom Panels
SAFETY PRECAUTIONS
WARNING
Contains small parts which could be
a choking hazard for small children.
Children should be under adult
supervision at all times or serious
injury could occur.
Always unload and transport one unit
at a time, then reconfigure in the new
location (if combined into a set).
Serious bodily injury and/or damage
to personal belongings may occur.
Do not hang on the wall. The product
structure is not designed for wall
hanging. Serious bodily injury,
damage to personal belongings,
and/or damage to the wall may occur.
CARE INSTRUCTIONS
• Wipe clean with a dry cloth.
Short Cube
B
2 ea
Short Cube Side Panels
Do not overload. If any shelf, top, or
bottom of bows or bends, it is
overloaded. The shelf, top, or bottom
could collapse and cause serious
bodily injury and/or damage to
personal belongings.
Do not climb or step on. Unit may
become unstable and either tip or
collapse. Serious bodily injury
and/or damage to personal belongings
may occur.
Do not mount or attach anything to the
sides, rear or front of the unit as this can
create a force which can cause the unit to
tip. Serious bodily injury and/or damage
to personal belongings may occur.
C
D
3 ea
8 ea
Locking Clips
Large Phillips Screws
6739-11676-WHT
A Phillips screwdriver.
E
8 ea
Wooden Dowels
Follow proper safety procedures when using
power tools and ladders (when applicable).
We recommend you protect your work
surface during assembly to prevent
scratching or damage to tabletops, wood
floors, etc.
A set of multiple units must be secured with
at least 1 clip per 6" face, 1 clip per 12"
vertical face, 2 clips per 12" horizontal face
and 3 clips per 24" face when attaching these
units together.
• MOUNTING SET TO WALL: If set height
exceeds 36 inches, use an anti-tip kit (not
included) to avoid tipping.
Tools Needed:
F
8 ea
Screw Covers
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the The Container Store Clip & Cube 6739-11676-WHT and is the answer not in the manual?

Questions and answers

Summary of Contents for Whitmor The Container Store Clip & Cube 6739-11676-WHT

  • Page 1 6739-11676-WHT Clip & Cube Short Cube ® Tools Needed: A Phillips screwdriver. PARTS: 2 ea 2 ea 3 ea 8 ea 8 ea 8 ea Top/Bottom Panels Short Cube Side Panels Locking Clips Large Phillips Screws Wooden Dowels Screw Covers SAFETY PRECAUTIONS WARNING •...
  • Page 2 6739-11676-WHT Clip & Cube Short Cube ® STEP 3: STEP 1:  Using a Phillips screwdriver (not Gather the following parts: included), securely tighten the 8  2 Top-bottom panels (A) Phillips screws (D) to assemble  2 Short cube side panels (B) each section.
  • Page 3 Firmly slide locking clips (C) through the small opening on the back side of the set as shown below. Page 3 “Clip & Cube ” is a registered trademark of Whitmor, Inc. Patent Pending. Printed in China. Rev.#0 | 8.9.21 ®...
  • Page 4: Safety Precautions

    6739-11677-WHT Clip & Cube Small Cube ® Tools Needed: A Phillips screwdriver. PARTS: 2 ea 2 ea 3 ea 8 ea 8 ea 8 ea Top/Bottom Panels Cube Side Panels Locking Clips Large Phillips Screws Wooden Dowels Screw Covers SAFETY PRECAUTIONS WARNING •...
  • Page 5 6739-11677-WHT Clip & Cube Small Cube ® STEP 3: STEP 1:  Using a Phillips screwdriver (not Gather the following parts: included), securely tighten the 8  2 Top-bottom panels (A) Phillips screws (D) to assemble  2 Cube side panels (B) each section.
  • Page 6 Firmly slide locking clips (C) through the small opening on the back side of the set as shown below. Page 3 “Clip & Cube ” is a registered trademark of Whitmor, Inc. Patent Pending. Printed in China. Rev.#0 | 8.9.21 ®...
  • Page 7 6739-11679-WHT Clip & Cube Large Rectangle ® Tools Needed: A Phillips screwdriver. PARTS: 2 ea 2 ea 3 ea 8 ea 8 ea 8 ea Top/Bottom Panels Rectangle Locking Clips Large Phillips Screws Wooden Dowels Side Panels Screw Covers SAFETY PRECAUTIONS WARNING •...
  • Page 8 6739-11679-WHT Clip & Cube Large Rectangle ® STEP 3: STEP 1:  Using a Phillips screwdriver (not Gather the following parts: included), securely tighten the 8  2 Top-bottom panels (A) Phillips screws (D) to assemble  2 Rectangle side panels (B) each section.
  • Page 9 Firmly slide locking clips (C) through the small opening on the back side of the set as shown below. Page 3 “Clip & Cube ” is a registered trademark of Whitmor, Inc. Patent Pending. Printed in China. Rev.#0 | 8.9.21 ®...
  • Page 10 6739-11924-WHT Clip & Cube Short Rectangle ® Tools Needed: A Phillips screwdriver. PARTS: 2 ea 2 ea 3 ea 8 ea 8 ea 8 ea Rectangle Short Rectangle Locking Clips Large Phillips Screws Wooden Dowels Top/Bottom Panel Side Panels Screw Covers SAFETY PRECAUTIONS WARNING •...
  • Page 11 6739-11924-WHT Clip & Cube Short Rectangle ® STEP 1: STEP 3: Gather the following parts:  Using a Phillips screwdriver (not included),  2 Rectangle top/bottom panel (A) securely tighten the 8 Phillips screws (D) to  2 Short rectangle side panels (B) assemble each section.
  • Page 12 Firmly slide locking clips (C) through the small opening on the back side of the set as shown below. Page 3 “Clip & Cube ” is a registered trademark of Whitmor, Inc. Patent Pending. Printed in China. Rev.#0 | 8.9.21 ®...