Russian Pptp - D-Link DIR-130 - Broadband VPN Router User Manual

Secton 3 - Configuraton
Choose Russian PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
Server IP/Name:
Enter the Server IP provided with your ISP.
PPTP Account:
Enter your PPTP account (username).
PPTP Password:
Enter your PPTP password and then retype the password in the
next box.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP.
Connect Mode:
Select either Always-on, On-Demand, or Manual.
WAN Physical
Select Static IP if your ISP assigned you the IP address, subnet
Setting:
mask, gateway, and DNS server addresses.
IP Address:
Enter the Server IP provided by your ISP (optional).
Subnet Mask:
Enter the Subnet Mask supplied by your ISP (Static IP only).
Gateway:
Enter the Gateway Address provided by your ISP (Static IP only)
Clone MAC Setting:
Click the Clone MAC Address button to copy the MAC Address from your PC.
DNS Setting:
Enter the Primary and Secondary DNS Server Addresses (Static IP only).
D-Lnk DIR-130 User Manual
Internet Setup

Russian PPTP

3