Mac Filters - D-Link DIR-130 - Broadband VPN Router User Manual

Secton 3 - Configuraton
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the router. You may enter up to 25 rules.
Configure MAC Select Turn MAC Filtering Off, Turn MAC
Filtering: filtering on and ALLOW computers listed to
access the network, or Turn MAC filtering on
and DENY computers listed to access the
network from the drop-down menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client:
Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Clear:
Click to delete the settings of the filter rule.
D-Lnk DIR-130 User Manual

MAC Filters

3