Windows Vista Users - D-Link DIR-130 - Broadband VPN Router User Manual

Appendx A - Networkng Bascs
Windows Vista Users
™
• Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network and Sharing Center icon. Along
the left panel in the window, click on Manage network connections.
• Right-click on the Local Area Connection which represents your D-Link network adapter (or other adapter) which will be connected
to your router.
• Highlight Internet Protocol Version 4 (TCP /IPv4) and click Properties.
• Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on
your router.
Example: If the router's LAN IP address is 192.168.0.1, make your IP
address 192.168.0.X where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network.
• Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
• Set Primary DNS the same as the LAN IP address of your router
(192.168.0.1).
• The Secondary DNS is optional (you may enter a DNS server from your
ISP).
• Click OK to save your settings.
D-Lnk DIR-130 User Manual