Manual Configuration; Dynamic (Cable) - D-Link DIR-130 - Broadband VPN Router User Manual

Secton 3 - Configuraton
My Internet Select Dynamic IP (DHCP) to obtain IP Address
Connection:
information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for Cable modem services.
Host Name:
The Host Name is optional but may be required
by some ISPs.
MAC Address:
The default MAC Address is set to the Internet
port's physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
Your PC's MAC Address button to replace
the Internet port's MAC address with the MAC
address of your Ethernet card.
DNS Addresses:
Enter the Primary and Secondary DNS server
IP address(es) assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. 1500 is the default MTU.
D-Lnk DIR-130 User Manual

Manual Configuration

Dynamic (Cable)

1