D-Link DIR-130 - Broadband VPN Router User Manual page 35

Secton 3 - Configuraton
Keep Alive / DPD: Select None, Keep Alive, or DPD (Dead Peer
Connection).
DH Group: Select a DH Group from the drop-down menu. As the DH
Group number increases, the higher the level of encryption
implemented for Phase 1.
IKE Proposal List: Select the Cipher and Hash from the drop-down menus.
The proposal listing is evaluated in order with #1 being the
first proposal to attempt in IKE negotiation.
IKE Lifetime: Enter the number of seconds for the IKE Lifetime. The period of time to pass before establishing a new IKE security
association (SA) with the remote endpoint. The default value is 28800.
PFS Enable:
Check to enable or uncheck to disable. PFS is an additional security protocol.
PFS DH Group:
Select a PFS DH Group from the drop-down menu. As the DH Group number increases, the higher the level of
encryption implemented for PFS.
IPSec Proposal List: Select the Cipher and Hash from the drop-down menus. The proposal listing is evaluated in order with #1 being
the first proposal to attempt in IPSec negotiation.
IPSec Lifetime:
Enter the number of seconds for the IPSec Lifetime. The period of time to pass before establishing a new IPSec
security association (SA) with the remote endpoint. The default value is 3600.
D-Lnk DIR-130 User Manual
• None - Select this option to disable Keep Alive.
• Keep Alive - Select this option to send random ping
requests from this endpoint to the remote endpoint
keeping the tunnel established during long idle
periods of inactivity.
• DPD - Select this option to delete the VPN tunnel if
there is no traffic detected. The VPN will re-establish
once traffic is again sent through the tunnel.
30