Port Forwarding - D-Link DIR-130 - Broadband VPN Router User Manual

Secton 3 - Configuraton
This section allows you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the "Computer Name" drop-down
menu. Select your computer and click <<.
Port:
Enter a port or port range for the public and private
port.
Traffic Type:
Select the type of protocol you would like to assign
to the rule.
Schedule:
The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Maintenance > Schedules section.
D-Lnk DIR-130 User Manual

Port Forwarding

3