D-Link DIR-130 - Broadband VPN Router User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DIR-130 - Broadband VPN Router
  6. User manual
D-Link DIR-130 - Broadband VPN Router User Manual

D-Link DIR-130 - Broadband VPN Router User Manual

8-port vpn router
Hide thumbs Also See for DIR-130 - Broadband VPN Router:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-130 - Broadband VPN Router

Summary of Contents for D-Link DIR-130 - Broadband VPN Router

  • Page 2 Table of Contents Manual Overview This manual contains the following sections: Section 1 - “Product Overview” describes what is included with the DIR-130 router, and things to consider before installing (page 1). Section 2 - “Installation” describes how to install the router on your network (page 6). Section 3 - “Configuration”...

  • Page 3: Manual Revisions

    Table of Contents D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description February 8, 2007 •...

  • Page 4: Table Of Contents

    Table of Contents Table of Contents Manual Overview ............i Russian PPTP ..........23 Manual Revisions ............ ii Network Settings ..........24 Trademarks .............. ii DHCP Server Settings ......... 25 DHCP Reservation ........26 Product Overview ............1 VPN Settings ........... 27 Package Contents............
  • Page 5 Table of Contents DDNS ............... 46 System Check ..........47 Schedules ............48 Log Settings ............. 49 Device Information ........... 50 Log ..............51 Statistics ............52 Active Session ..........53 LAN Clients ............54 Routing ............54 VPN ..............55 Help ..............

  • Page 6: Product Overview

    Secton 1 - Product Overvew Product Overview Package Contents D-Link DIR-130 8-port VPN Router Power Adapter Ethernet Cable CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DIR-130 will cause damage and void the warranty for this product.

  • Page 7: System Requirements

    Secton 1 - Product Overvew System Requirements • An Ethernet-based Cable or DSL modem Network Requirements • 10/100 Ethernet devices Computer with the following: • Windows , Macintosh, or Linux-based operating ® system • An installed Ethernet adapter Browser Requirements: •...

  • Page 8: Features

    Secton 1 - Product Overvew Features • Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including: • Parental Controls - Easily applied content filtering based on MAC Address, URL, and/or Domain Name. •...

  • Page 9: Hardware Overview

    Secton 1 - Product Overvew Hardware Overview Connections Reset LAN Ports (1-8) Pressing the Reset button restores the router to Connect Ethernet devices such as its original factory default settings. computers, switches, and hubs. Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.

  • Page 10: Leds

    Secton 1 - Product Overvew Hardware Overview LEDs Local Network LEDs A solid light indicates a connection to an Status LED Ethernet-enabled computer on ports 1-8. A blinking light indicates that the This LED blinks during data transmission. DIR-130 is ready. Power LED Internet LED A solid light indicates a proper...

  • Page 11: Installation

    Secton  - Installaton Installation This section will walk you through the installation process. Before you Begin Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on.

  • Page 12: Connect To Cable/Dsl/Satellite Modem

    Secton  - Installaton Connect to Cable/DSL/Satellite Modem If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below: 1. Place the router in an open and central location. Do not plug the power adapter into the router. 2.

  • Page 13: Connect To Another Router

    Secton  - Installaton Connect to Another Router If you are connecting the D-Link router to another router to use as a switch, you will have to do the following before connecting the router to your network: • Disable UPnP ™...
  • Page 14 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router. 8. You may now use the other 7 LAN ports to connect other Ethernet devices and computers.

  • Page 15: Configuration

    Secton 3 - Configuraton Configuration This section will show you how to configure your new D-Link router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).

  • Page 16: Setup Wizard

    Secton 3 - Configuraton Setup Wizard You may click Setup Wizard to quickly configure your router. If you want to enter your settings without running the wizard, click Manual Configure and skip to page 16. Click Launch Internet Connection Setup Wizard to begin. D-Lnk DIR-130 User Manual...
  • Page 17 Secton 3 - Configuraton Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue.
  • Page 18 Secton 3 - Configuraton If you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone Your PC’s MAC Address and then click Next to continue.
  • Page 19 Secton 3 - Configuraton If you selected L2TP, enter your L2TP username and password. Click Next to continue. If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. If you selected Big Pond, select your authentication server from the drop down menu.
  • Page 20 Secton 3 - Configuraton If you selected Russian PPPoE, enter your PPPoE username and password. Click Next to continue. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.

  • Page 21: Manual Configuration

    Secton 3 - Configuraton Manual Configuration Dynamic (Cable) My Internet Select Dynamic IP (DHCP) to obtain IP Address Connection: information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.

  • Page 22: Pppoe (Dsl)

    Secton 3 - Configuraton Internet Setup PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer.

  • Page 23: Pptp

    Secton 3 - Configuraton Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

  • Page 24: L2Tp

    Secton 3 - Configuraton Internet Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

  • Page 25: Big Pond (Australia)

    Secton 3 - Configuraton Internet Setup Big Pond (Australia) My Internet Select BigPond (Australia) from the drop-down Connection: menu. Username: Enter your BigPond username. Password: Enter your BigPond password and then retype the password in the next box. Auth Server: Select the type of authentication server being used from the drop-down menu.

  • Page 26: Static (Assigned By Isp)

    Secton 3 - Configuraton Internet Setup Static (assigned by ISP) Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x).

  • Page 27: Russian Pppoe (Dsl)

    Secton 3 - Configuraton Internet Setup Russian PPPoE (DSL) Choose Russian PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.

  • Page 28: Russian Pptp

    Secton 3 - Configuraton Internet Setup Russian PPTP Choose Russian PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

  • Page 29: Network Settings

    Secton 3 - Configuraton Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility.

  • Page 30: Dhcp Server Settings

    Secton 3 - Configuraton DHCP Server Settings The router has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.”...

  • Page 31: Dhcp Reservation

    Secton 3 - Configuraton DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range.

  • Page 32: Vpn Settings

    Secton 3 - Configuraton VPN Settings The DIR-130 supports IPSec, PPTP, and L2TP VPN as the Server Endpoint. Add VPN Profile: Select IPSec or PPTP/L2TP from the drop-down menu and then click Add. D-Lnk DIR-130 User Manual...

  • Page 33: Ipsec Settings

    Secton 3 - Configuraton IPSec Settings Enable: Check this box to enable IPSec. Name: Enter a name for your VPN. Local Net/ Mask: Enter the local (LAN) subnet and mask. (ex. 192.168.0.0/24) Remote IP: Select Site to Site or Remote User for the required VPN configuration.
  • Page 34 Secton 3 - Configuraton • Additional Authentication Methods (Optional) XAUTH - Check this box to include additional username and password authentication requirements for the VPN. Select Server Mode or Client Mode. • Server Mode - Select a group from the Authentication database drop-down menu containing the list of user credentials permitted.
  • Page 35 Secton 3 - Configuraton Keep Alive / DPD: Select None, Keep Alive, or DPD (Dead Peer Connection). • None - Select this option to disable Keep Alive. • Keep Alive - Select this option to send random ping requests from this endpoint to the remote endpoint keeping the tunnel established during long idle periods of inactivity.

  • Page 36: Pptp/L2Tp Settings

    Secton 3 - Configuraton PPTP/L2TP Settings PPTP uses TCP port 1723 for its control connection and uses GRE (IP protocol 47) for the PPP data. PPTP supports data encryption by used MPPE. L2TP uses UDP protocol to transport the PPP data. This is often encapsulated in IPSec encryption instead of MPPE.

  • Page 37: Port Forwarding

    Secton 3 - Configuraton Port Forwarding This section allows you to open a single port or a range of ports. Name: Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service...

  • Page 38: Application Rules

    Secton 3 - Configuraton Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-130. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port”...

  • Page 39: Mac Filters

    Secton 3 - Configuraton MAC Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router.

  • Page 40: Website Filters

    Secton 3 - Configuraton Website Filters Website Filters are used to deny LAN computers from accessing specific web sites by the URL or domain. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display.

  • Page 41: Firewall Settings

    Secton 3 - Configuraton Firewall Settings A firewall protects your network from the outside work. The D-Link DIR-130 offers a firewall protection such as SPI (Stateful Packet Inspection) and NAT/PAT (Network Address Translation/Port Address Translation). Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ (Demilitarized Zone).

  • Page 42: Firewall Rules

    Secton 3 - Configuraton Firewall Settings Firewall Rules Up to 75 Firewall Rules can be created to control the incoming and outgoing traffic on your router. For each rule you can create a name and control the direction of traffic. You can also allow or deny a range of IP Addresses, protocol and a port range.

  • Page 43: Advanced Network Settings

    Secton 3 - Configuraton Advanced Network Settings UPnP: Click on the checkbox to enable Universal Plug and Play (UPnP ). UPnP provides compatibility ™ with networking equipment, software and peripherals. Enable WAN Ping Unchecking the box will not allow the DIR-130 Respond: to respond to pings.

  • Page 44: Routing

    Secton 3 - Configuraton Routing This section allows you to define static routes for the WAN types of Static IP, Dynamic IP, Russian PPPoE, and Russian PPTP with ISPs that require these parameters. Up to 50 Static Routing Rules can be defined. Interface: Select WAN or WAN_Physical from the drop down menu.

  • Page 45: Certificates

    Secton 3 - Configuraton Certificates This section is used to configure Certificates that are used with an IPSec based VPN. You can configure local certificates and the certificates of remote peers. Select one of the three options from the drop-down menu: Local Certificate & Private key, Certificate of Remote Peers, or Certificate Authorities.

  • Page 46: User Groups

    Secton 3 - Configuraton User Groups This section is used to configure Certificates that are used with an IPSec based VPN. You can configure local certificates and the certificates of remote peers. Select one of the three options from the drop-down menu: Local Certificate & Private key, Certificate of Remote Peers, or Certificate Authorities.

  • Page 47: Administrator Settings

    Secton 3 - Configuraton Administrator Settings This page will allow you to change the Administrator password. You can also enable Remote Management. Admin Password: Enter a new password for the administrator login. Only the administrator can make changes to the settings.

  • Page 48: Time And Date

    Secton 3 - Configuraton Time and Date The Time and Date page allows you to configure, update, and maintain the correct time and date on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configure to automatically adjust the time when needed.

  • Page 49: System Settings

    Secton 3 - Configuraton System Settings Save Settings to Use this option to save the current router Local Hard Drive: configuration settings to a file on the hard disk of the computer you are using. First, click the Save Configuration button. You will then see a file dialog, where you can select a location and file name for the settings.

  • Page 50: Update Firmware

    You can upgrade the firmware of the router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.

  • Page 51: Ddns

    Secton 3 - Configuraton DDNS DDNS (Dynamic Domain Name System) is a method of keeping a domain name linked to a changing IP Address. The DDNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address.

  • Page 52: System Check

    Secton 3 - Configuraton System Check The router System Check uses a ping test to send ping packets to test if a computer in on the Internet. Ping Test: Enter the IP address that you wish to ping and click the Ping button. Ping Results: The results of your ping attempts will be displayed here.

  • Page 53: Schedules

    Secton 3 - Configuraton Schedules This section is used to manage schedule rules for port forwarding, firewall rules, web filtering, and remote Name: Enter a name for your new schedule. Days: Select a day, a range of days, or All Week to include every day.

  • Page 54: Log Settings

    Secton 3 - Configuraton Log Settings SMTP Server/IP The address of the SMTP server that will be Address: used to send the logs. Email Address: The email address to which the logs will be sent. Click on Send Mail Now to send the email. Save Log File to Click to save the log to your hard drive.

  • Page 55: Device Information

    Secton 3 - Configuraton Device Information This page displays the current information for the DIR-130. It will display the LAN, WAN (Internet), and the firmware version of the router. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.

  • Page 56: Log

    Secton 3 - Configuraton This page displays the log events of the router. Here you can view the logs of the router. First Page: This button will direct you to the current first page of the log. Last Page: This button will direct you to the current last page of the log.

  • Page 57: Statistics

    Secton 3 - Configuraton Statistics This page displays the current statistics of the router. Here you can view the amount of packets that pass through the router. Refresh: This button will refresh the statistics to display updated information. Reset: This button will reset the statistics packet count to zero for all interfaces listed.

  • Page 58: Active Session

    Secton 3 - Configuraton Active Session The Active Session Status menu shows the active sessions currently running on your router. The list will display the protocol, the source IP address and the destination IP address for each active session. First Page: This button will direct you to the current first page of the active sessions.

  • Page 59: Lan Clients

    Secton 3 - Configuraton LAN Clients This page displays a list of currently connected wired clients. This table also displays the connection time and MAC address of the connected wired clients. Routing This page displays a list of the default and static routes used by the router. D-Lnk DIR-130 User Manual...

  • Page 60: Vpn

    Secton 3 - Configuraton The VPN table displays a list of current PPTP, L2TP, L2TP over IPSec, and IPSec VPN sessions. Help The support menu provides additional information regarding features included in the DIR-130 Web Management Interface. D-Lnk DIR-130 User Manual...

  • Page 61: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
  • Page 62 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
  • Page 63 Secton  - Troubleshootng 3. Why can’t I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex.
  • Page 64 Secton  - Troubleshootng You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).

  • Page 65: Networking Basics

    Check your IP address After you install your new D-Link adapter or if you already have an Ethernet adapter installed on your computer, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the steps below.

  • Page 66: Statically Assign An Ip Address

    2000 – From the desktop, right-click My Network Places > Properties. ® • Right-click on the Local Area Connection which represents your D-Link network adapter (or other adapter) which will be connected to your router. • Highlight Internet Protocol (TCP/IP) and click Properties.

  • Page 67: Windows Vista Users

    • Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network and Sharing Center icon. Along the left panel in the window, click on Manage network connections. • Right-click on the Local Area Connection which represents your D-Link network adapter (or other adapter) which will be connected to your router.

  • Page 68: Technical Specifications

    Appendx B - Techncal Specficatons Technical Specifications Standards • IEEE 802.3 • IEEE 802.3u LEDs • Power • WAN • Status • LAN (1-8) Operating Temperature • 32°F to 104°F ( 0°C to 40°C) Humidity • 95% maximum (non-condensing) Safety & Emissions •...

  • Page 69: Default Factory Settings

    Appendx B - Techncal Specficatons Default Factory Settings When you receive your router, the default factory settings are in effect as listed in the table below. You may change any of the network settings. If you perform a reset (hold the reset button on the back of the unit), the router will reset with the following settings: Setting Default Value...

  • Page 70: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 71: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 72 Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...
  • Page 73 • The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.

  • Page 74: Limitation Of Liability

    RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.

  • Page 75: Fcc Statement

    • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

  • Page 76: Gnu/Linux Gpl

    Appendx E - GNU/Lnux GPL GNU/Linux GPL • “GPL Software” means GPL software licensed to you under the GNU General Public License as published by the Free Software Foundation (GPL). A copy of the GPL is included below. • “Open Source Software” means various open source software components licensed under the terms of applicable open source license agreements included in the materials relating to such software.

  • Page 77: Gnu General Public License

    Appendx E - GNU/Lnux GPL GNU General Public License Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 78 Appendx E - GNU/Lnux GPL Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
  • Page 79 Appendx E - GNU/Lnux GPL b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users...
  • Page 80 Appendx E - GNU/Lnux GPL The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
  • Page 81 Appendx E - GNU/Lnux GPL It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
  • Page 82 Appendx E - GNU/Lnux GPL 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN...

  • Page 83: Registration

    Appendx F - Regstraton Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.1 September 5, 2007 D-Lnk DIR-130 User Manual...

Table of Contents