Related Manuals for Edwards SHR2950
Summarization of Contents
Declaration of Conformity
Edwards Naming Principle
Explains the product naming convention for liquid ring pumps.
Declaration of Incorporation
Edwards Naming Principle
Explains the product naming convention for liquid ring pumps.
Material Declaration
Materials Content Declaration
Declares hazardous substances content in components per Chinese RoHS regulations.
Introduction to Liquid Ring Pump Systems
Scope and Definitions
Defines the manual's scope and key terms for liquid ring pump systems.
Pumping System Configurations
Describes base framed, once through, partial, and total recovery pump configurations.
Associated Publications and System Components
Lists associated publications and details on pumps, motors, and couplings.
Seal Liquid Systems and Application
Details seal liquid reservoir, heat exchanger, and suitable applications for the system.
Technical Data
Operating and Storage Conditions
Details environmental operating and storage parameters for the pump system.
Mechanical, Performance, Noise, and Vibration Data
Covers system dimensions, weights, performance, noise, and vibration levels.
Required Services and Construction Materials
Lists required electrical, cooling, and seal liquid services, plus materials of construction.
Installation Guide
Installation Safety Precautions
Outlines critical safety precautions for installing the liquid ring pump system.
Unpacking, Inspection, and Site Selection
Instructions for unpacking, inspecting, and selecting a suitable installation location.
Connecting Pipelines
Guides on connecting various pipelines to the system.
Electrical Connections and Commissioning Steps
Guides on electrical connections, safety, and system commissioning.
Installation Checks and Flushing Procedure
Checklist for verifying proper installation and procedure for draining/flushing.
Drive Coupling Alignment, Priming, and Rotation Check
Procedures for drive coupling alignment, system priming, and checking pump rotation.
Pumping System Start-up
Detailed steps for initiating the pumping system operation.
Pumping System Shut Down
Procedure for safely shutting down the pumping system.
Operation
System Start-up and Shut Down
Detailed steps for starting and safely shutting down the pumping system.
Maintenance Procedures
Maintenance Safety and Planning
Safety precautions for maintenance and an overview of the maintenance plan.
Weekly and Bi-Weekly Maintenance Tasks
Details specific maintenance tasks required at weekly and two-week intervals.
Yearly Maintenance, Lubrication, and Component Inspections
Covers yearly maintenance, lubrication, and inspection of pipelines and the pump.
Component Checks and Fault Finding Guide
Procedures for checking drive shaft, heat exchanger, bearings, and troubleshooting common issues.
Storage and Disposal Guidelines
Storage Preparation and Procedures
Safety, preparation, and procedures for short-term and long-term storage of the system.
System Disposal Procedure
Guidelines for safely disposing of the liquid ring pump system and contaminated components.
Service and Spare Parts
Service Options and Accessory Information
Information on Edwards service centres, options, and ordering accessories.
Ordering Spare Parts
Details on how to order specific spare parts for the liquid ring vacuum pumping systems.
Returning Equipment for Service
Service Return Procedures and Forms
Outlines the procedure for returning equipment for service, including required forms.
Need help?
Do you have a question about the SHR2950 and is the answer not in the manual?
Questions and answers