Electrical Characteristics; Thermal And Atmospheric Characteristics; Safety Characteristics; Operating Certifications - Intel AXXRMS2AF080 Hardware User's Manual

Electrical Characteristics

All power is supplied to the Intel
RMS2AF080 through the board-to-board connector via PCI Express* 3.3 V rails.
The supply voltages are 3.3 V ± 9 percent from PCI edge connector only. The maximum
power for the +3.3 V rail is 18 W. The +3.3 V rail is used by the 3.3 V logic circuitry and
also used to generate the other required voltage rails of +1.0 V and +1.8 V.

Thermal and Atmospheric Characteristics

The thermal and atmospheric characteristics are:
•
Relative humidity range: 20% to 80% non-condensing
•
Maximum dew point temperature: 32°C
•
Airflow must be at least 200 linear feet per minute (SFPM) to avoid operating above
the maximum ambient temperature.
The storage and transit environment conditions are:
•
Temperature range from -30°C to 80°C (dry bulb)
•
Relative humidity range: 5% to 90% non-condensing
•
MTBF (electrical components) number: 298,900 hours at 40°C

Safety Characteristics

The Intel
requirements of UL flammability rating V0. Each bare board is marked with the supplier
name or trademark, type, and UL flammability rating.

Operating Certifications

The RAID controller in this document is qualified to get Microsoft Windows* Winqual
certification (WHQL) at product launch.

Supported Device Technology

The various device technologies supported by the Intel
RMS2AF040 and RMS2AF080 are described in the subsections that follow.
Intel® Integrated RAID Module RMS2AF040 and RMS2AF080 Hardware User's Guide
®
Integrated RAID Module RMS2AF040 and RMS2AF080 meets or exceeds the
®
Integrated RAID Module RMS2AF040 and
®
Integrated RAID Module
23