Flying An Array Of Ax3210P And Ax1118Sp Systems Using Flying Bar Kptax3210S - PROEL AXIOM - VERSION 2.0 Manual

5.1. SUSPENDING AX3210P AND AX1118SP SYSTEMS
Figure 5.10: Verified configurations of arrays composed of AX3210P and AX1118SP systems with flying bar KP-
TAX3210.
5.1.3 Flying an array of AX3210P and AX1118SP systems using flying bar KP-
TAX3210S
Compact flying bar KPTAX3210S is advisable for permanent installations or for arrays of suspended
subwoofers. Because of its limited mounting possibilities, we certainly do not advise using the compact
version of the flying bar while on tour.
Choosing the configuration of the array
The configuration can be simulated by LAC, taking its limitations into due account. Thus, even if the
software does not explicitly indicate the use of flying bar KPTAX3210S, it can nonetheless verify the
possibility of using it.
Flying bar KPTAX3210S
Flying bar KPTAX3210S is the compact version of KPTAX3210, and they share the same load limits.
Flying bar KPTAX3210S allows only one mounting option (the reverse mode is not an option) and the
number of suspension points is lower (the first 12 suspension points on KPTAX3210). The bar features
two coupling cams for the front coupling with the first suspended enclosure; they can be put into the
lateral bars by insertion of 94AXMSP1 pins.
Sequence of assembly and disassembly operations
Assembly and disassembly operations are the same described for flying bar KPTAX3210.
Load limits
Load limits are analogous to those referring to flying bar KPTAX3210. Figure 5.12 shows some con-
figurations that have been verified; if you need to verify any other configuration please contact Proel's
) * 
 
%+   
  
     
  
  
  
  
!  
"  
#  
 ,!
$  
  
  ,!
  ,!
  
  
!  
"  
#  !
  !
$  "
  "
% & '% # (
 
 
54
5. Guide to System Setup
) * 
 
%+   
  
     
 
 
 
 
! 
" 
# 

$ 
 
 
 
 
 
% & '% # (
 
 







!
"
#