Edge121Sp - PROEL AXIOM - VERSION 2.0 Manual

EDGE121SP

EDGE121SP
• Direct Radiation Low-Frequency Enclosure
• 21" Woofer with 4" ISV voice coil, DSS,
DDR
• Easy to transport
Description
21" direct radiation subwoofer EDGE121SP can
complete the bass response operating from 30 to
80 Hz, with an impressive excursion control and
great power handling. It can operate at 800 W
continuous (AES) and can handle peaks of 6 dB
higher (3200 W) without problems or damage.
Thanks to its Double Silicon Spider, to its Double
Demodulating Ring and to the over-damped box
in which it is housed, EDGE121SP can provide
a large amount of well-controlled, defined energy
at low frequencies.
Data Sheet
System
System Type
Frequency Response
Maximum Peak Output
Signal Processing
Crossover Frequency
Input Power Rating
Sensitivity
Nominal Impedance
Transducer
Low Frequency Device
Mechanical Data
Construction
Dimensions (WxHxD)
Weight
EDGE121SP
direct radiation bass-reflex
subwoofer
32 Hz - 80 Hz
130 dB @ 1 m
Proel DSO26
Lake Contour Pro 26
from 80 Hz to 160 Hz
800 W AES, 1600 W program
98 dB SPL ( 2.83 V @ 1 m )
8 Ω
21" woofer - 4" voice coil
18/24 mm birch plywood
internally reinforced
with paint finish
58.4 x 76.5 x 81.0 cm
63.5 kg - 140 lb
Engineering specifications
The system should be a passive subwoofer, with
a frequency response from 32 Hz to 80 Hz. The
loudspeaker of the system should be a 21", 8-
ohm woofer with a 4" voice coil, in a direct-
radiating configuration and bass reflex loaded.
The cabinet should be a parallelepiped built with
18/24 mm, internally-reinforced birch plywood
and should be 76.5 cm high, 58.4 cm wide
and 81 cm deep. The system should be Proel
EDGE121SP.
Connectors
2 x Neutrik Speakon NL4MP linked in parallel.
1+
2-
2+
16
2. Specifications
1+ IN+
1- IN-
1-
2+
2-