Table of Contents
Advertisement
5. Guide to System Setup
5.1.2 Flying an array of AX3210P and AX1118SP using flying bar KPTAX3210
Flying bar KPTAX3210 allows the suspension of systems composed by AX3210P and AX1118SP
Array configuration choice
We discussed the advisability of systems composed with suspended subwoofers in the preceding chap-
ter. The LAC software will simulate the acoustic behaviour of the system, define its barycentre and
determine the mechanical configuration of the system.
Sequence of assembly operations
The sequence of the assembly operations is exactly the same as described for arrays composed only of
AX3210P. The only exception is the angle setting which is different when you have to couple AX3210P
systems with AX1118SP.
AX1118SP systems feature a U-shaped frame like the one mounted on AX3210P systems, which has
a slotted bar for coupling purposes. The angle between AX1118SP systems cannot be different from
◦
0
because of the parallelepiped shape of the enclosure; you can however adjust the angle between
AX3210P and AX1118SP without exceeding 6
For the adjustment of the intermediate angles, that is of the half degrees, use the same rule described
earlier – couple the hole in the bar with one of those on the U-shaped frame subtracting 1.5
value shown on the side of each hole.
Sequence of disassembly operations
Disassembly operations of mixed systems follow the same principle used for the disassembly of arrays
composed of only AX3210P systems.
Load limits
Load limits have been determined during the design phase by calculations executed through modelling
of the finished elements then validated by empirical load tests.
The following table indicates the maximum quantity of enclosures that can be safely suspended:
Figure 5.10 shows some configurations that have been verified; please contact Proel's Technical
Office if you need to verify any other configuration.
6
And obviously of arrays composed only of AX1118SP systems.
5.1. SUSPENDING AX3210P AND AX1118SP SYSTEMS
◦
- this limitation is also due to the shape of the enclosure.
AX3210P
AX1118SP
24
0
22
1
20
2
18
3
16
4
14
5
12
6
10
7
8
8
6
9
4
10
2
11
0
12
53
6
.
◦
from the
Hide quick links:
Advertisement
Table of Contents
