Step2 Connection To The Network; Connecting To The Network - Canon Vb-C60 - Ptz Network Camera Start Manual

Step2 Connection to the Network

Connecting to the Network

In the example described here, one camera is connected to a PC via a HUB. Connect a LAN
cable to VB-C60 to turn the camera on. Note that if you turn on the camera and then leave it for 20
minutes, VB Initial Setting Tool (→ P.2-9) will no longer be able to detect the camera. In such
case, turn the camera off and then on again.
VB-C60 is equipped with PoE (Power over Ethernet). PoE can supply power to the camera via a
LAN cable from an IEEE 802.3af-compliant PoE HUB.
Via PoE HUB
(Rear)
When using an AC adapter (option) or external power supply, connect them as shown below.
Via AC adapter or external power supply
AC power
cable
AC adapter
2-6
AC power cable
PoE HUB
LAN cable
(Rear)
HUB
LAN cable
The figure shows the AC adapter (option).
Notebook PC
Notebook PC