Bundled Software; Vbadmin Tools Ver. 4.0; Vb-C60 Viewer Ver. 1.0 - Canon Vb-C60 - Ptz Network Camera Start Manual

Bundled Software

The software listed below is bundled with VB-C60.
For the latest information, please refer to Canon Web site.
VB Initial Setting Tool v4.0 (→ P.2-9)
VB Initial Setting Tool is for initial settings of the camera.
The tool is available on the Setup CD-ROM (→ P.2-4).
Only the administrator needs to install this software.
VBAdmin Tools Ver. 4.0 (→ dOperation Guide P.2-2)
VBAdmin Tools are for creating panorama images and
visually setting view restriction areas and preset positions
using the panorama image. You can also set for motion
detection and display logs. The tools are available on the
Setup CD-ROM (→ P.2-4).
Only the administrator needs to install this software.
VB-C60 Viewer Ver. 1.0 (→ dOperation Guide P.3-2)
VB-C60 Viewer is to view video shot by VB-C60 and to
control the camera. Three user authority levels are
available: "Administrator", "Authorized Users" and "Guest
Users". VB-C60 Viewer is a built-in viewer, which doesn't
need to be installed. The viewer can display JPEG video,
but you need to install VK-Lite Viewer (→ P.1-6) to view
MPEG-4 video.
If you use VB-C60 together with VB-C300 or VB-C50 series, firstly install the VBAdmin
Tools for VB-C50 series, then VB-C300, and finally install the VBAdmin Tools bundled
Note
with VB-C60.
Once VB Initial Setting Tool v4.0 is installed, it can also be used for VB-C300 and
VB-C50 series.
Tip
1-5